Sterilizing Section:adopt boiled water for boiling the FFB, which loosen the contacts between fruit and bunch.
Thresher Process The purpose of threshing is the oil palm fruit be separated from the fruit bunch through strong vibration, Threshing equipment is revolving drum thresher.
Digested Machine It is used to release the palm oil in the fruit by breaking down the oil-bearing cells.
The palm fruit digester machine fills from the thresher, and it is important to match the capacity of the harvester to the palm oil digester machine.
Pressing Section:Palm fruite enter into continuous screw press for pressing.
Vibratile Sieve It adopts the vibrate sieve to remove out the dregs, fiber from the crude oil and the crude oil should be quickly filtered or it would be cool, the oil would become fat, total 3 lyaers, and different mesh of the sieve, after the third sieve, the crude oil is very cleaner. Clarification Section:The crude oil first diluted with water washing,through settlement and filtration, the fiber material removed from the oil, and then carries out continuous settlement, the whole divided into two parts: oil and sediment.
Depricarping section The pressed palm fibre cake goes into cake breaker, then use winndowing system to seperate the nut and fibre.
Palm nut treatment process/Centrifuge sieve This process adopts the centrifuge siever to separate the nut and fibre and dregs. The nut is for store after drying under the sun,the fibre and dregs is for the fuel.
Kernel recovery section the nut is crushed to be divided into two or more petal, kernel was released.
Audited Supplier 
){kind=link}